Glossary

A

AC motor
A motor driven by alternating current
Armature
The component (stator or rotor) in a motor that generates the magnetic field from the supplied electric power
Armature coil
The winding that generates the magnetic field in the motor's stator or rotor

B

Bipolar
A technique of a stepper motor where the electrical current flows in either direction in separate coils
Brush
Component in a DC motor that is connected in series with the external power supply and reverses the electrical current through electrical contact with the commutator
Brushless motor
A DC motor that, in place of brushes and a commutator, uses a position detector or other such means to reverse the electircal current that drives the motor

C

Capacitor
An electronic component that stores electrical energy
Closed loop
A motor control technique that operates with the use of feedback (by monitoring the rotor position, etc.)
Commutator
A component in a DC motor that rotates along with the rotor to reverse electical current through electrical contact with the brushes
Converter
The circuit in the driver for a brushless DC motor that converts the supplied electric power from alternating to direct current
Coreless motor
A brushed DC motor with a rotor that lacks an iron core, or a brushless DC motor with a stator that lacks an iron core

D

DC motor
A motor driven by direct current
Detent torque (residual torque)
The maximum externally applied torque needed to rotate a stepper motor with no current flow (no magnetic excitation) and open terminals

F

Field (magnetic field)
The magnetic field generated in the motor by a permanent or electro-magnet

H

Holding torque (maximum stationary torque)
The torque that holds a stepper motor stationary with maximum current flow when attempting to rotate the motor
Hybrid (HB) type
A stepper motor that has a set of teeth on its rotor like a VR motor, and that rotates by both reluctance torque and magnet torque
Hysteresis motor
An AC motor that uses a material in the rotor that exhibits hysteresis and that rotates by means of the hysteresis torque

I

Inductance
The effect that opposes or resists the change of current flow through a motor coil
Interior permanent magnet motor
A brushless motor in which permanent magnets are embedded in the interior of the rotor

L

Linear motor
A motor that produces liniar force rather than rotational force
Load inertia
The moment of inertia of the load or the motor itself
Loss of synchronization
The status in which a stepper motor is out of synchronization with the input pulses

M

Magnetic field
A region in which a magnetic force is present (directed from the north (N) to the south (S) pole of the magnet)
Maximum continuous response frequency
The maximum input pulse frequency at which a stepper motor remains synchronized when increasing its frequency under no load
Maximum self-start frequency
The maximum input pulse frequency at which a stepper motor is able to start, stop, and reverse in step syncronized with the input pulse
Mechatronics
Technology that combines mechanical and electronic engineering

O

Open loop
A motor control technique that operates without the use of feedback (without monitoring the rotor position, etc.)

P

Permanent magnet (PM) type
A stepper motor that has permanent magnets in its rotor and rotates by magnet torque alone
Permanent magnet motor
A motor that uses permanent magnets to produce magnetic field
Pull in torque
The maximum torque at which a steper motor is able to start, stop, and reverse in step syncronized with the input pulse frequency
Pull out torque
The maximum torque at which a stepper motor is able to remain synchronized when the frequency of input pulses is gradually increased after starting in the self-start range
Pulse
A short burst of electricity produced by turning the power supply on and off

R

Rotor
A rotating armature
Rotor inertia
The effect that opposes the rotation of the rotor

S

Self-excited or separately excited motor
A motor that uses an electromagnet to produce magnetic field
Self-start range
The region of the motor characteristics in which a stepper motor with a fixed load is able to start, stop, and reverse in step with the input pulse frequency
Shading coil
A closed-circuit coil wound around part of the stator core
Single-phase
The conventional AC power supply typically available in homes
Sirocco fan
A fan that typically has forward curved blades and blows air perpendicular to the axis of rotation (has more blades than a turbo fan)
Slew range
The region of the motor characteristics in which a stepper motor is able to remain synchronized when the frequency or load torque are gradually increased after starting in the self-start range
Slip
The phenomenon or status whereby the speed of an AC motor is slower than its synchronous speed.
SR motor
A VR stepper motor that also has a function for detecting rotor position, which allows it to avoid loss of synchronization
Start-up torque
The maximum torque generated by the motor when starting
Stator
A stationary armature
Step angle
The angle by which a stepper motor rotates in response to a single pulse
Stepper motor (stepping motor)
A motor that rotates one step at a time in response to electrical pulses
Surface permanent magnet motor
A brushless motor in which permanent magnets are attached to the circumference of the rotor

T

Three-phase
A form of AC power supply mainly found in industry
Torque curve (speed-torque characteristic)
A curve representing the relationship between the speed of a motor and its torque and current
Turbo fan
A fan that typically has backward curved blades and blows air perpendicular to the axis of rotation (has fewer blades than a sirocco fan)

U

Ultrasonic motor
A motor that moves by means of ultrasonic vibrations, using friction to transform the small displacements caused by the vibrational deformation of an element into rotational or linear motion
Unipolar
A technique of a stepper motor where the electrical current flows in one direction only in separate coils
Universal motor
A motor with a wound rotor and wound stator that works with both alternating and direct current, or a brushed DC motor with an electromagnet as the stator magnet

V

Variable reluctance (VR) type
A stepper motor that rotates by reluctance torque alone, without using a permanent magnet

Y

Yoke
The part of the motor's stator or rotor that forms the magnetic flux circuit from north to south pole

Contact us for more information

  • New inquiry
  • Prototype
  • Upgrade
  • Customization
  • Your spec
  • Literature
  • Support
  • Others

Contact us